/168540_09d1ff4.png)
/168540_0d19ecf.png)
/168540_0698d30.png)
/168540_0352efe.png)
/168540_0072fde.png)
/168540_03b6518.png)
/168540_09d1ff4.png)
/168540_0d19ecf.png)
/168540_0698d30.png)
/168540_0352efe.png)
/168540_0072fde.png)
/168540_03b6518.png)
Eumer Rod Sleeve Set 6 pcs – Build your own rod holder easily
Six rod sleeves, countless possibilities! With Eumer rod sleeves you can build a rod holder for ice fishing rods or spinning rods that suits your needs. Attach the sleeves to an ice fishing sled, a boat, a wall or a separate wooden or metal frame.
Make your own functional rod holder
With a pack of six sleeves, you can have multiple rods in their own place. You can install the sleeves side by side or place them separately exactly where you need them.
The sleeves are suitable for example:
- On the inner or outer edge of the ice fishing rod
- For storing rods on a boat
- For the wall or storage rod rack
- For a rod holder built into a wooden strip or metal plate
- For upgrading old Eumer ice fishing docks and rod racks
Three easy mounting methods
1. Screw fastening
Attach the rod sleeves directly to your desired surface using the included stainless steel countersunk screws.
2. Hole mounting
Drill 33 mm holes in the base and press the sleeves into place. The sleeves' locking claws hold them in material up to 2 mm thick. For example, holes in aluminum sheet can be made with a step drill.
You can also use the sleeves to upgrade old Eumer ice fishing docks by enlarging the existing holes to fit.
3. Adhesive fastening
If screwing is not possible, you can attach the sleeve to the back with durable double-sided tape.
Withstands fishing use
Developed in Finland, Eumer Rod Sleeves are made of durable and frost-resistant plastic. The smooth inner surface makes it easy to insert and remove the rod.
The sleeves are also suitable for storing many round-handled tools and accessories.
Specifications
- Product: Eumer Rod Sleeve 6 pcs.
- Use: ice fishing rods, spinning rods and other appropriately sized round-shafted fishing equipment
- Material: durable, frost-resistant plastic
- Length of one sleeve: 60 mm
- Outer diameter: 32.8 mm
- Inner diameter: 30 mm
- Top collar height: 15 mm
- Hole mounting diameter: 33 mm
- Maximum material thickness for through-hole installation: 2 mm
- Mounting: with screw or locking claws in the hole
Package includes: 6 rod sleeves and 6 stainless steel countersunk head mounting screws.
Build a rod rack suitable for your own fishing equipment and keep your rods organized and easily accessible.
